Antique Tin Ceiling Tiles Installations Support
Antique tin ceiling tiles – The mosts important things in antique tin ceiling installations are actually the support brackets and not the tin panels. After this step, fixing the panels is just a baby job. The network system must be perfectly installed so that the panels should fit perfectly.
The first installing antique tin ceiling tiles and most important step is to secure the U-shaped brackets on each wall. The space between the ceiling joists and bottom panels must be at least 4. Tin the marks on the wall. The put one end of the chalk line on the brand and the other end on another mark on the other side of the wall and then jump the line. Chalk remains impregnated on the wall.
Now, with the chalk line drawn, just fix the brackets L-shaped in each parede. Verification the level from time to time to see if he is heterosexual. Use screws to secure the brackets to the wall.
You will need to place the main runners according to the size of the antique tin ceiling tiles panels. Standard tiles are 2 × 2 big feet. You must install a runner every 48 inches. Make the measurements long before the installation of the corridors and even the media. You need to connect a wire length in each cross point. Runners must remain at the same level.