Vinyl Wood Plank Flooring in Basement
Vinyl wood plank flooring – vinyl flooring imitation wood floor is a tailless form that is made to look like wooden planks. As a regular driftwood floor, which is designed to break together on any hard, flat surface. Unlike wood, which is completely moisture-proof, making it ideal for a basement or other area where moisture can be a problem. Remove the trim floor around the perimeter of the room with a bar hammer and crowbar. It will not break as it takes off.
Set the first sheet vinyl wood plank flooring along the shore where you want to start at one end of the room. Establish two plastic spacers between the table and the wall. This will create a space of about 3/8 inch to allow the expansion of vinyl. Hold the next plank off the end of the first, pressing the ends together until they snap into place. Continue this process, laying planks along the edge of the track and snapped together. Put spacers between the planks and the wall all the way along the edge.
Use the knife to cut the last board to fit against the wall. Cut by the establishment of its square across the board in the correct spot, scoring the surface with the knife next to the square and flex board until it clicks. Place the next course, cut the planks together on the sides. Arrange the tables so that the ends do not line up between courses, giving a “staggered” natural look. Some computers have boards in different sizes to accommodate this configuration of vinyl wood plank flooring.